True BrickMasonry IncCast-In-Place Concrete · WY

Casper, Wyoming · Cast-In-Place Concrete

Concrete poured true — from footing to finish.

True BrickMasonry Inc delivers structural and decorative cast-in-place concrete across Wyoming — foundations, slabs, driveways, stamped and colored flatwork, aluminum and steel formwork, rebar placement, in-house batching, and freeze-thaw durable mixes built for high-plains winters.

View Services Pour Sequence

Core Services

Structural concrete, decorative flatwork, and complete field production.

From aluminum and steel formwork through curing, control joints, and cylinder breaks — True BrickMasonry manages the full cast-in-place scope with in-house batching calibrated to Wyoming's climate.

Foundations & Structural Slabs

Cast-in-place footings, stem walls, grade beams, and structural slabs with engineered rebar placement.

Spread and continuous footings
Monolithic and suspended slabs
Rebar placement per structural drawings

Formwork Systems

Aluminum and steel forms for repeatable, dimensionally accurate pours on commercial and residential sites.

Aluminum wall and slab forms
Steel column and beam forms
Custom formwork for irregular geometry

Concrete Pumping

Boom and line pumping to remote placements, elevated slabs, and hard-to-access residential sites.

Line pump for tight residential access
Boom pump for commercial volumes
Coordinated pour sequencing

Driveways & Sidewalks

Residential and commercial flatwork with proper subgrade preparation, control joints, and curing compounds for long service life in freeze-thaw cycles.

Driveway aprons and parking pads
ADA-compliant sidewalk pours
Control joints at engineered spacing

Decorative Finishes

Stamped concrete, exposed aggregate, and integral colored mixes for architectural flatwork that performs in Wyoming winters.

Stamped patterns and release agents
Exposed aggregate washes
Integral and surface-applied color

In-House Batching & Mix Design

Custom mix designs batched on site for consistent slump, air content, and compressive strength — adjusted for ambient temperature and pour volume.

Freeze-thaw durable air-entrained mixes
High-early and standard strength designs
On-site slump and temperature monitoring

Testing & QC

Concrete testing and cylinder breaks verify design strength before formwork strips and backfill proceed.

Field sampling per ASTM C172
7-day and 28-day cylinder breaks
Curing compound application records

Structural Concrete

Foundations and slabs formed, reinforced, and poured to engineer specification.

True BrickMasonry mobilizes aluminum and steel formwork systems sized for each pour — footings trenched and formed, rebar chairs and ties placed per structural drawings, and concrete placed without cold joints through coordinated pumping and batch timing.

Control joints are saw-cut or tooled at spacing calculated for slab geometry and expected shrinkage. Curing compounds are applied immediately after finishing to retain moisture through the critical early-strength window — especially important during Casper's low-humidity summers and overnight temperature swings.

Cast-in-place foundations and stem walls
Structural and on-grade slabs
Rebar placement with cover verification
Control joints and curing compound application

Concrete foundation formwork and rebar placement at a Wyoming construction site — Formwork · Rebar · Structural Pour

Decorative Flatwork

Stamped, colored, and exposed aggregate finishes that survive Wyoming winters.

Decorative concrete demands the same structural discipline as commercial slabs — proper subgrade compaction, reinforced edges, control joints aligned with stamp patterns, and air-entrained mixes for freeze-thaw durability.

True BrickMasonry integrates color hardeners, release agents, and aggregate exposure timing into the pour schedule so finish quality is consistent from the first square foot to the last.

Stamped concrete driveways and patios
Exposed aggregate walkways and entries
Integral colored concrete flatwork
Sealer recommendations for high-traffic surfaces

Finished stamped concrete driveway with decorative pattern — Stamped Concrete · Decorative Flatwork

Stamped Patterns

Ashlar slate, cobblestone, wood plank, and custom stamp layouts with complementary border bands.

Exposed Aggregate

Surface retarder timing and aggregate selection for durable, slip-resistant pedestrian surfaces.

Colored Concrete

Integral color loads and dry-shake hardeners matched across multiple pours for uniform appearance.

Standard Flatwork

Broom-finished driveways, sidewalks, and utility pads with engineered joint spacing.

Mix Design Parameters

In-house batching tuned for Wyoming climate and project requirements.

Application	Typical Spec	Notes
Structural Foundations	3,000–4,000 PSI · 4–6% air	Freeze-thaw durable; rebar cover per ACI 318
On-Grade Slabs	3,000–4,500 PSI · fiber optional	Control joints at 1.5× slab thickness spacing
Driveways & Sidewalks	3,500 PSI · 5–7% air	Air-entrained for F/T exposure; broom or stamp finish
Stamped Flatwork	3,500 PSI · color integrated	Release agent compatible with sealer selection
Exposed Aggregate	3,500 PSI · selected pea/gravel	Surface retarder timing calibrated to ambient temp
High-Early Strength	4,000+ PSI · Type III cement	Accelerated strip time for tight schedule pours
Cylinder Testing	ASTM C31 field cure · C39 breaks	7-day and 28-day breaks; records for engineer review
Curing	ASTM C309 liquid membrane	Applied immediately after final finish; 7-day minimum cure

Pour Sequence

A controlled workflow from subgrade to cylinder break.

Every True BrickMasonry pour follows a documented field sequence — mix design verified, forms inspected, concrete placed without interruption, and strength confirmed before the next construction phase proceeds.

Subgrade & Layout

Compaction verification, form layout, and rebar inspection signed off before batching begins.

Batch & Deliver

In-house batching to design slump; pump or direct chute placement coordinated with finish crew.

Place & Finish

Continuous pour to avoid cold joints; screed, float, stamp, or aggregate exposure per spec.

Cure & Joint

Curing compound applied; control joints tooled or saw-cut at engineered spacing and timing.

Test & Release

Cylinder breaks at 7 and 28 days; formwork strip authorized by test results and engineer.

Typical On-Grade Slab SectionScale 1:50

Compacted Subgrade
#4 Rebar Grid4" Slab · 3500 PSI
Control JointAluminum Edge Form

Field Detail

Every layer specified — subgrade, reinforcement, concrete, joints, and cure.

True BrickMasonry documents slab sections with rebar size and spacing, concrete thickness and strength, control joint locations, and curing compound type before each pour. Aluminum forms provide straight edges on driveways and sidewalks; steel forms handle taller stem walls and commercial footings.

Concrete pumping extends reach on sites where truck access is limited — boom placement for elevated slabs, line pumps through residential gates for backyard patios and detached garage pads.

Quality Control

Strength verified by cylinder breaks — not assumed from the batch ticket.

True BrickMasonry samples every structural pour, cures cylinders per ASTM C31, and breaks at 7 and 28 days. Results are logged and available for engineer review before formwork stripping, backfill, or subsequent trade mobilization.

Quality control documentation and concrete test records on a construction project — QC Records · Cylinder Break Logs

Field Sampling

ASTM C172-compliant samples taken during placement. Slump, air content, and temperature recorded on every structural pour.

Cylinder Breaks

Standard 4×8 cylinders cured in field conditions and broken at 7 and 28 days per ASTM C39. Results compared against design strength.

Curing Compliance

ASTM C309 curing compounds applied at specified coverage rate. Cure duration documented before formwork removal or traffic loading.

Project Types

Cast-in-place concrete for Wyoming residential, commercial, and municipal work.

From single-family driveways to commercial slab-on-grade and municipal sidewalk programs — True BrickMasonry scales production without sacrificing mix consistency or finish quality.

Residential

Driveways, sidewalks, patios, garage slabs, and foundation walls for new construction and additions across Natrona County.

Commercial

Slab-on-grade, loading docks, parking areas, and structural foundations for retail, office, and light industrial buildings.

Municipal

Sidewalk replacement, ADA ramp pours, utility pad construction, and public works flatwork with documented testing.

Agricultural

Equipment pads, feedlot curbing, and utility slabs with freeze-thaw durable mixes for exposed rural applications.

Wyoming Climate

Freeze-thaw durable mixes engineered for high-plains winters.

Casper's temperature swings — hot dry summers, sub-zero winters, and repeated freeze-thaw cycles — demand air-entrained concrete with proper water-cement ratio control. True BrickMasonry batches in-house to adjust air content and slump for ambient conditions on pour day, not from a generic ready-mix ticket written for a different climate zone.

Air-Entrained Mixes Freeze-Thaw Durable In-House Batching De-Icing Salt Resistant Low W/C Ratio Control

About True BrickMasonry

Casper's cast-in-place concrete contractor — formed, tested, and finished in-house.

True BrickMasonry Inc is headquartered at 135 S Lennox St in Casper, Wyoming, providing cast-in-place concrete, structural foundations, slabs, and decorative flatwork across Natrona County and the surrounding region. We combine aluminum and steel formwork, rebar placement, in-house batching, concrete pumping, and field quality control into one coordinated field operation.

Our scope covers everything from structural footings and monolithic slabs to stamped driveways, exposed aggregate walkways, and integral colored flatwork. Curing compounds, control joints, and cylinder break testing are standard on every structural pour — not optional add-ons requested after the fact.

By batching on site, True BrickMasonry controls mix consistency pour to pour, adjusts for Wyoming's freeze-thaw exposure, and eliminates the schedule uncertainty that comes from coordinating separate ready-mix, pump, and finish subcontractors on the same slab.

Single-Source Pour

Formwork, batching, pumping, placement, finishing, and testing managed by one field team.

Verified Strength

Cylinder breaks at 7 and 28 days confirm design strength before strip and load.

Climate-Calibrated

Freeze-thaw durable, air-entrained mixes adjusted for Casper's seasonal extremes.

Technical FAQ

Common questions from builders, engineers, and property owners.

In-house batching lets True BrickMasonry adjust mix design on pour day for ambient temperature, volume, and finish type — without waiting on a plant schedule or accepting a generic mix designed for a different application. Slump, air content, and batch timing stay under direct field control from first load to last.

Yes. Structural pours — foundations, structural slabs, and commercial flatwork — include ASTM C172 field sampling and C39 cylinder breaks at 7 and 28 days. Results are logged and available for engineer or building official review.

Decorative flatwork uses the same freeze-thaw discipline as structural work: air-entrained mixes with 5–7% air content, proper subgrade drainage, control joints at engineered spacing, and ASTM C309 curing compounds applied immediately after finishing. Integral color and exposed aggregate mixes are specified for de-icing salt exposure where applicable.

True BrickMasonry deploys aluminum forms for slabs, driveways, and sidewalk edges where straight-line accuracy and fast cycle times matter. Steel forms handle taller stem walls, grade beams, and commercial footings requiring higher lateral pressure capacity. Custom formwork is built for irregular geometry and step footings.

True BrickMasonry Inc is based in Casper, Wyoming, and serves cast-in-place concrete projects across Natrona County and the greater Wyoming region — including residential, commercial, municipal, and agricultural applications.